Sterilization Guide

This general guide outlines good practice for cleaning, inspecting and sterilizing reusable stainless-steel instruments. Always follow your local regulations, your facility’s validated procedures and any instrument-specific instructions for use.

1. Cleaning

• Rinse instruments promptly after use to stop debris drying on surfaces.
• Clean with a neutral-pH enzymatic detergent and a soft brush; open hinged instruments to reach the joints.
• Rinse thoroughly with purified water and dry completely.

2. Inspection

• Check for cleanliness, damage, alignment and smooth action.
• Remove any instrument showing pitting, cracks or corrosion from service.

3. Sterilization

• Sterilize using a validated method appropriate to the instrument (for example, steam autoclave) per your facility’s protocol.
• Allow instruments to dry and cool before storage.

4. Storage

• Store clean, dry instruments in a protected, low-humidity environment.

This information is general guidance only and is not a substitute for professional judgement or manufacturer instructions.